“These new controllers enable lighting engineers to create customised dynamic LED lighting animations tailored to their system requirements,” according to the company. “They feature integrated non-volatile memory to store animation sequences and LED parameters, essential for dynamic lighting effects such as colour transitions, pulsing, fading and animated patterns.”

  • IS31CS8979 is a -40 to +85°C industrial-commercial part
  • IS32CS8979 is a -40 to +125°C automotive part with optional AEC-Q100 PPAP

Both come in a 6 x 6mm QFN-40 package, the automotive version with wettable flanks.

The parts appear to be functionally identical (see note below)

They include an 18-channel independently programmable LED driver that can deliver up to 60mA per channel, which can be paralleled for more current. LED outputs are 40V tolerant, allowing long strings of LEDs to be driven.

They also include an I2C bus through which further LED drivers can be controlled – the company suggests its multiple instances of its own IS3xFL3265x series ICs, which will also each drive up to 18 LEDs at up to 60mA (and look very much like the new parts minus the internal MCU).

Multiple IS3xCS8979 (the new parts) can also be cascaded to support up to 15 additional LED drivers, with synchronisation limited by the code space, said Lumissil.

64kbyte of ECC-protected flash is provided to store animation sequences, the playing of which can be triggered by external signals detected on the nine  available GPIO pads.

The MCU, which the company said has “DSP functionality” and can “perform complex color space conversions, brightness transitions and colour pattern animations”, also has 2kbyte of ECC-protected SRAM and supports in-system programming.

General functions include a 12bit SAR ADC, flexible PWM generation, multiple timer-counters, a 16bit quadrature decoder, a UART and a LIN interface (that can also function as a second UART).

Note: Beyond the operational temperature difference, Electronics Weekly can find no other differences – watch this space as the company has been asked if this is correct, and about the DSP capability, and the exact packaging of the industrial version – although it is empahsised that the automotive version has a package with wettable flanks, both data sheet drawings show the same JEDEC MO-220 package.